Steel Septic Tank

Sewage Holding Tanks

Top of page>

Fiberglass Septic Tank

Sizes	Length	Width	Height	Weight (In LBS)
750	90"	72"	50"	250
1000	111"	72"	52"	325
1200	137"	72"	52"	425
1500	156"	72"	52"	550

Top of page>

This is ONE TOUGH TANK!

All the features of the standard tank, but it can be used as a septic tank, a holding tank, a pump chamber or as a cistern tank for potable water.

• Use native soils for backfill
• No water needed during backfilling
• Pre-plumbed according to state code
• Accepts 4" effluent filters

Pre-Plumbed
Bruiser tanks are shipped to you ready for installation. Our pre-plumbed tanks include tee assemblies installed at the inlet and outlet. Tees are sized/cut according to each state code so the tank that you receive will be ready for installation.

Watertight Lid
Bruiser tanks come outfitted with a domed lid. This improved design is significantly stronger than other lid designs. When leaving our factory, the lid is attached to the tank with stainless steel screws and comes standard with a foamed, polyethylene gasket between the lid and the tank. The gasket provides a watertight seal at the lid area.

Polyethylene Bruiser

Top of page>

NORWESCO Septic Tanks

The world’s leading manufacturer of polyethylene tanks, NORWESCO has been producing polyethylene septic tanks since 1980. With that kind of experience, NORWESCO offers you proven products that you can count on for years of dependable, trouble-free service.

For septic system replacement and new home construction, NORWESCO‘s polyethylene septic tanks are designed for durability and quick, easy installation. Any NORWESCO septic tank can be transported to the job site in a pickup truck and carried by just two people. That enables you to install the tank on your schedule.

All NORWESCO septic tanks are manufactured by means of the rotational molding process, which produces a one-piece, seamless, watertight tank. Polyethylene is unaffected by soil chemicals and by the chemicals and gases present in sewage, so NORWESCO septic tanks will not rust or corrode and require no additional coatings as other tanks do. NORWESCO’s strict quality guidelines ensure an environmentally safe septic tank.

NORWESCO septic tanks are backed by a full three-year warranty and have been certified by state and local health departments from coast to coast. Where applicable, NORWESCO septic tanks have been certified by both IAPMO and CSA.

NORWESCO septic tanks come equipped with manhole covers and detailed installation procedures. Manhole extensions and lid/riser combinations are available to bring tank access to grade and to meet code specifications. The 1000, 1250 and 1500 gallon sizes are available in two compartment configurations.

Pre-Plumbing: All NORWESCO septic tanks that are 1000 working gallons and above are "pre-plumbed" with PVC inlet and outlet assemblies. Assemblies and their components are made of either SDR35 or SCH40 PVC depending on state or local code requirements. All assemblies are sized according to code requirements as well. Finally, an EPDM gasket is placed between the "T" assembly and the tank wall to assure watertightness. NORWESCO septic tanks will arrive to you ready for installation.

Watertight Dome Lids: All septic tanks manufactured at all facilities, are equipped with a watertight domed lid. This domed lid is significantly stronger than previous lids we have offered. When leaving our factory, the lid(s) will be attached to the tank with stainless steel screws and come standard with a foamed, polyethylene gasket between the lid and the tank. This gasket provides a watertight seal at the lid area.

Top of page>

Top of page>

Top of page>